Years end

Like probably most of you I'm finding it hard to believe that the year is at it's end. Maybe its just part of getting older, but it seems as if the clock has been speeding up. I'd like to take the opportunity now to thank all of you that have been reading these posts. 2010 was the year I finally decided to join the 21st century and start to take advantage of some of the technology that is available. Finally after 15 years I got a website for the nursery up.  http://www.kimurabonsainursery.com This coming year I 'm going to redo it and make it more user friendly and to have more of our inventory available on it. I also started this blog in the past year.  I even joined Facebook, which I never thought I would do. Look for a Kimura Bonsai Nursery page to come in 2011. I draw the line at Twitter though, you won't find us there. The landscaping side of the business has also joined the 21st century with updates to our website, http://www.robertpressler.com and email newsletters. In the new year I'm going to start learning how to use the computer to help in the design process. I've even started a web forum with some partners about my other passion, bass fishing. You can check it out here if you'd like .http://www.bassnboat.com
 This year has been tough business wise as I know it was for many others, but we hung in and got through it. I'm hopeful the coming year will be better for all of us. At the nursery we'll have more material specific workshops, some with guest teachers. The ongoing class schedule will also be expanded this year. We'll  be doing more workshops geared towards beginners  to the world of bonsai. I'll be doing a number of club programs as well as a workshop at the Golden State Bonsai Federations convention in November. I'm also talking with several organizations in other parts of the country about possible workshops and demo's.
 In the coming year I will do more  posts on the process of creating a bonsai ,from choosing  the material and giving it the initial styling, then following up with posts showing the development, potting etc.. I'll also be doing some work on some really exciting pieces of older material, some never worked on, others needing a restyling. As always I'm interested in what you would like to see so I'm open to suggestions.
 I want to wish all of you a healthy, happy and prosperous 2011. Talk to you all next year.

Bob Pressler

Working with less than ideal material

I'd like to take the opportunity to wish all of you all the best in this holiday season and in the new year.  I also want to thank you all for taking the time to read my blogs. I hope you will join me in the coming months as we continue to explore the art of bonsai.
Todays subject is going to be about improving some less than ideal material. We all want to have the perfect tree, with great nebari, good taper throughout the trunk, good branch placement etc.. The fact of the matter is more often then not we don't get to start with  ideal material. One of the challenges to being a bonsai artist is learning how to bring the most out of the material we have to work with.  The tree we are going to work on today is a Japanese Black Pine that I acquired a couple of years ago after its owner passed away. Its an old tree that was started by a older Japanese man from 5 gallon nursery material in 1980. The roots were not in good shape at all, and worse they are so old and large there isn't much that could be done with them. The tree was also not in the best of health when I received it. It was about a foot or so taller than it is now and the needles were long with not too many interior buds.

The above photo shows the present front of the tree as envisioned by the original owner. To try to hide the hollow caused by the raised roots a stone was placed under them. Here is a view from the other side of the tree.

On this side there is a large shari at the bottom of the trunk as well as a large scar from a chop in the trunk made to  shorten the trunk, add movement to the trunk and to create create a new leader. This cut was made in 2008 just after I got the tree. It was last transplanted then as well.
To start todays work I'll begin by pulling old needles. Starting at the top of the tree I begin pulling out all the old sets of needles from the tree. There are several reasons for pulling needles- its one of the major tools we have for balancing out the growth of the tree. On the upper stronger parts you can pull more needles to slow down the trees energy, on  weaker lower areas you would pull less. In this way you can help to balance the energy going to each part of the tree. On the strongest parts I even remove some of the new needle sets. Another important reason for pulling needles is to allow air and light into the interior of the tree allowing inside buds to get stronger. The photo below shows the tree after needle pulling.

The next step is to thin out the buds that grew as a result of last springs candle cutting. Some areas have 4 or even 5 new buds that grew. These I'll reduce to only 2 buds. One of them will become the new leader of the branch and the other will form a side branch. If they are really strong buds, especially in the top of the tree I may pick the weaker ones to keep and cut the stronger ones. This is also another way we can help to balance the trees growth. On weaker areas I'll take off the smaller ones and keep the stronger ones.
The next step will be to wire all the branches and put them in place. This photo shows that process starting. When wiring I'll start at the bottom of the tree and work my way up. I place each branch in it approximate place as I wire it.

As can be seen in the above photo there is a piece of stone filling in the hollow under the roots. What's not so apparent is the smaller hollow under the left side. I'll fit another piece of stone under there.
I made the decision to change the front of the tree. Even with the rock under  the two big roots it's still ugly. I like the shari at the base of the tree I think it adds great character to a tree that could use all the help it can get. The scar from the major trunk cut will probably take another four or five years to completely heal over. Here is the tree after the wiring and fitting another piece of stone under the roots.

The next step is to transplant the tree and to change the planting angle to go with the new front. There is a bunch of roots growing around the bottom of the pot, definitely time for a repotting. On the floor you can see the mass of encircling roots that I cut off

After repotting with its new front and angle the tree looks like this. Notice how nicely the two pieces of stone fit under the roots. I think that this is a major improvement over what we started with.

After a couple of years of candling cutting and needle removal the needle size should be shorter and more uniform throughout the tree.
I hope you enjoyed todays post. I'm always interested to hear any comments you may have about todays work or suggestions for future posts.
From Kimura Bonsai Nursery- a big Merry Christmas and Happy New Year to all.